TP-Link POE20E-Outdoor, Gigabit PoE+ extender, 30W, IP68

Industrial PoE+ extender designed for demanding outdoor environments with maximum durability and reliability.

The POE20E-Outdoor model solves the key problem of limited distance in PoE networks. It extends the standard 100-meter range up to 200 meters at gigabit speeds (100 m + 100 m) or even up to 500 meters at lower speeds (250 m + 250 m). This allows you to power and connect IP cameras, access points, and other network devices even in very remote locations without the need to install additional power sources.

The extender is equipped with two gigabit ports 10/100/1000 Mb/s with automatic speed negotiation and fully supports IEEE 802.3af/at standards with a maximum output of up to 30 W. IP68 rating ensures absolute protection against dust and water, while an extremely wide operating temperature range of -40 to +65 °C guarantees trouble-free operation in any climate conditions. 6 kV surge protection and ESD/EMP protection (air ±15 kV, contact ±10 kV) protect against lightning and electrostatic discharge.

Adaptive transmission speed
The extender features an adaptive data rate design that automatically adjusts transmission speed according to cable length and quality. For Cat. 3 cables and higher, it supports 10 Mb/s speed at distances up to 250 m, for Cat. 5 and higher 100 Mb/s speed at distances up to 100 m, and for Cat. 5e and higher full gigabit speed of 1000 Mb/s also at distances up to 100 m. Under certain conditions (Cat5e cables 160–170 m long), intermittent connection may occur – in such cases, it is recommended to manually set the connected device to 10 Mb/s full-duplex or enable Extend Mode on the power sourcing device.

Robust construction
Waterproof housing with IP68 certification and compact dimensions of 221.7 × 31.5 × 31 mm (including waterproof components) allow installation directly in the field without the need for protective enclosures. The device is certified according to CE, FCC, BSMI, and KC.

BASIC SPECIFICATIONS

Ports: 2× 10/100/1000 Mb/s RJ-45 with auto-negotiation
Standards: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
PoE input: compatible with 802.3af/at devices
Maximum PoE output: 30 W
Range: 200 m (100 m + 100 m) at gigabit / 500 m (250 m + 250 m) at lower speeds
Indicators: 2× Link/Act LED
Operating temperature: -40 to +65 °C
Storage temperature: -40 to +70 °C
Rating: IP68
Surge protection: 6 kV
ESD/EMP protection: air ±15 kV, contact ±10 kV
Dimensions: 221.7 × 31.5 × 31 mm (including waterproof components)