Home   Accessories   Other Accessories   Victron BP-100 Battery Protect, 48V-100A

Victron BP-100 Battery Protect, 48V-100A

Add recension
2 916 CZK 2 410 CZK without VAT
Common price: 3 542 CZK

After order for 5 days

Personal pickup at place
Teplice Not in stock
Ústí Not in stock
Code: BATGWL0177 PN: BPR048100400 Warranty: 60 months
Victron BP-100 Battery Protect (48V) The BatteryProtect battery protection disconnects the battery from non-essential loads before it is completely discharged (which would cause its destruction) or while it still has enough... more
Count:
Nelze objednat

Favorites
Compare
Print
Send to friend
Victron BP-100 Battery Protect (48V)

The BatteryProtect battery protection disconnects the battery from non-essential loads before it is completely discharged (which would cause its destruction) or while it still has enough capacity to start the engine.

  • Disconnects appliances as protection against deep battery discharge
  • Maximum load current 100 A

Simple programmable
The BatteryProtect can be set to connect/disconnect at several different voltage levels.
The display, divided into seven segments, shows which setting has been selected.

Special settings for Li-ion batteries
In this mode, the BatteryProtect protection can be controlled via the VE.Bus BMS interface.

Very low energy consumption
Low consumption is very important for Li-ion batteries, especially after shutdown at low voltage. For more information, please refer to the technical data for Li-ion batteries and the VE.Bus BMS interface user manual.

Overvoltage protection
In case of overvoltage with possible damage to sensitive devices, the devices are disconnected if the DC voltage exceeds 64 V.

Spark-resistant
It does not work with relay elements, but with MOSFET transistor switches, so sparking does not occur.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the set value for more than 12 seconds. Therefore, starting the engine does not activate the alarm. The alarm output is an open collector output to the negative bus, max. current 500 mA. This alarm output is typically connected to a buzzer or to visual signaling.

Delayed load disconnection
The load is disconnected 90 seconds after the alarm is triggered. If during this time the battery voltage rises to the "connection threshold value" (e.g. during engine starting), the load will not be disconnected.

BatteryProtect battery protection is unidirectional, meaning current can only flow from the "in" input to the "out" output. Reverse current flowing from the "out" output to the "in" input is not allowed and will damage the device.

BASIC SPECIFICATIONS

Nominal voltage: 48 V
Voltage range: 24–70 V
Maximum continuous load current*: 100 A
Peak current (for 30 seconds): 250 A
Disconnect voltage threshold: 42 V
Connect voltage threshold: 48 V
Operating temperature: -40 to +40 °C (full load), up to 60 % of rated load at +50 °C
IP protection rating: electronics IP67, connections: IP00
Connection (thread): M8
Dimensions: 123 × 120 × 62 mm
Weight: 0.8 kg

*BatteryProtect battery protection is not intended for reverse current from charging sources!

Basic connection diagram:

Brand
Manufacturer :  VICTRON
Type specification :  Other
Technical specification
Operating temperature min./max. (°C) :  -40 až +40 °C
Max. operating temperature (°C) :  40
Min. operating temperature (°C) :  -40
Inputs and outputs
Connector :  M8
Power supply
Rated Voltage (V) :  48
Max. input voltage (V) :  70
Max. Input Current (A) :  100
Warranty
Warranty period CRN (months) :  60
Warranty period EU (months) :  60
Usage and purpose
Type of accessories :  battery protect
Physical properties
Weight (kg) :  0.8
Dimensions :  123 × 120 × 62 mm
Height (mm) :  62
Width (mm) :  123
Depth (mm) :  120
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll