Ubiquiti G5 Flex

The UniFi Protect G5 Flex camera provides a clean and sharp image at 2688 × 1512 resolution at 30 fps with night vision capability.
The camera supports active PoE power (37-57 V DC).

• Compact 2K HD PoE camera (indoor & outdoor)
• 5 MP CMOS sensor (4 MP video)
• Field of view: 102.4° horizontally, 54.9° vertically, 120.6° diagonally
• IR illumination (night mode) with a range of up to 6 m (20 ft)
• AI event detections
• H.264 video compression
• Microphone (can be turned off)
• IPX4 + IK04 rating (vandal-resistant)
• Mounting: desktop, wall, pole, hard-ceiling (included), ceiling, conduit (sold separately)
• PoE powered
• Managed through UniFi Protect application (version 2.2.7 or 2.7.28 and newer for web / 1.10.0 and newer for iOS & Android)

The camera is part of the UniFi Protect product line, where the main advantage is centralized management of all devices in a single software. The UniFi Protect software is pre-installed on the UniFi Protect NVR server (IPZUBT1003) for Full HD recording of up to 50 cameras, UniFi Cloud Key Gen2 Plus (NAOUBT1019) for recording up to 15 cameras, or UniFi Dream Machine PRO (NAAUBT1121) for recording up to 32 cameras.
The advantage of these servers is that they work with mobile device applications, allowing you to have your camera system under constant surveillance.*

UniFi Protect App for Android Mobile Devices

UniFi Protect App for iOS Mobile Devices

BASIC SPECIFICATIONS

Image Sensor Resolution: 5 MP
Image Sensor: 5 MP CMOS sensor (4 MP video)
Maximum Resolution: 2688 × 1512 px
Frame Rate: up to 30 fps
IR Illumination: yes, up to 6 m (20 ft)
Lens: fixed
Interface: 1× RJ-45 10/100 Mbps
Video Compression: H.264
Memory Card Slot: none
Audio: yes, integrated microphone
Power: PoE 37-57 V DC
Operating Temperature: -20 to +40 °C
Weight: 170 g
Dimensions: 107.5 × 48 × 48 mm

Attention:
The camera is not intended for outdoor use. Installation is only possible in a protected environment (such as under a ceiling, under a roof, etc.). For installation in an outdoor environment, you can use Ubiquiti Professional wall mounts IPIUBT0003 and IPIUBT0004, which can be found in related products.

Manual:
https://dl.ui.com/qig/uvc-g5-flex.pdf

Datasheet:
https://dl.ui.com/ds/uvc-g5-flex_ds.pdf

*Individual cameras without a recording server cannot be configured or managed in mobile applications. Access to individual cameras can be achieved through the web interface using the device's IP address.

WDR (Wide Dynamic Range)
G4, G5, and AI series cameras feature True WDR technology. Generation G3 and older have only digital WDR (DWDR).
When the FPS (Frames Per Second) is increased (above the default value), WDR is turned off due to exposure limit.