Home   Accessories   Other Accessories   Victron Filax-2 230V/50Hz-240V/60Hz

Victron Filax-2 230V/50Hz-240V/60Hz

Add recension
6 608 CZK 5 461 CZK without VAT
Common price: 8 028 CZK

To send: 2 pcs

Personal pickup at place
Teplice Not in stock
Ústí Not in stock
Code: SOPGWL0327 PN: SDFI0000000 Warranty: 60 months
Victron Filax 2 Filax 2: the ultra-fast transfer switch The Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source... more
Count:
Add to Cart

Favorites
Compare
Print
Send to friend
Essox
Victron Filax 2

Filax 2: the ultra-fast transfer switch

The Filax has been designed to switch sensitive loads, such as computers or modern entertainment equipment from one AC source to another. The priority source typically is the mains, a generator or shore power. The alternate source typically is an inverter. With its switching time of less than 20 milliseconds, sensitive loads will continue to operate without disruption. The Filax is not intended to supply high power household equipment like washing machines or electric motors.

Open transition transfer

The Filax is an open transition (break before make) transfer switch.
The maximum load transfer time is 16 ms.
The load is normally supplied by the priority source, and is transferred to the alternate source if:
- The voltage of the priority source drops below the threshold value.
- The frequency of the priority source drops below the low frequency threshold value, or increases beyond the high frequency threshold value.
Reverse transfer from the alternate source to the priority source is initiated when the priority source has operated within the voltage and frequency reverse switching limits during 30 s.

  • Install the Filax in a dry, well-ventilated area.
  • The input cables from the generator/mains, the inverter and the output cables to the appliances should be connected according to the wiring diagram.
  • If a load of less than 850 Watts is connected, then the wire bridges should be removed.
  • The frequency (50 Hz or 60 Hz) is set with a jumper. 50 Hz no jumper placed. 60 Hz jumper placed (see photo in datasheet). If the jumper is not set for the frequency the voltage switching threshold levels will be incorrect.
  • Both inputs must be protected against current levels higher than 16 amps.
  • The front of the casing is attached using the four supplied screws.
  • The Filax is now ready for use.

SPECIFICATIONS

Maximum current: 16 A
Rated voltage: 230 V (50 Hz), 240 V (60 Hz)
Material & Colour: ABS, grey (RAL7035)
Protection category: IP65
Weight 0,8 kg
Dimensions: 255 x 120 x 75 mm

Manuals:
Manual - Filax 2 (HTML5)
Manual - Filax 2 (PDF)

Filax system with inverter backup to the grid or generator:

Filax system with inverter backup and AC battery charger and/or solar charger:

Filax system with inverter/charger backup:

Filax system with two inverter/chargers connecting to individual battery banks or a single battery bank:

Filax system with two inverter/chargers and isolation switches:

Filax system with battery monitoring:

Filax system with full local and remote monitoring:

Brand
Manufacturer :  VICTRON
Type specification :  Other
Technical specification
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -20
Inputs and outputs
Connector :  terminal
Power supply
Frequency (Hz) :  50/60
Max. Input Current (A) :  16
Input Voltage (V) :  180 - 260 (AC)
Output voltage (V) :  180 - 260 (AC)
Warranty
Warranty period CRN (months) :  60
Warranty period EU (months) :  60
Physical properties
Weight (kg) :  0.8
Dimensions :  255 × 120 × 75 mm
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

  • SEPLOS Basement for bateries PUSUNG-S
    Add to Cart
    Special price
    SEPLOS Basement for bateries PUSUNG-S
    3 662 CZK 3 027 CZK without VAT

    Code: UPSSEA0001

Scroll